"Pinpoint any PC failure.
Amazing system. You'll be a HERO!"

John C. Dvorak, PC Magazine


·         Packet-sized Test Card + Manual, HANDY!

·         Instantly Shows why System Won't Boot

·         Built-in Voltmeter Checks Power to 95%

·         Shows Status of 10 Critical PC BUS Signals

·         Easy-to-read Digital Display Shows Test Codes

·         New! Built-in Logic Probe for the SuperTech

·         Troubleshoots to Component Level, £££Saves

·         Tests ALL XT, AT, ISA*, & EISA* PC's (MCA opt.)


INSTANT FAULT ANALYSIS
If your a typical technician, you have wasted thousands of dollars in precious time trying to diagnose faults in dead PCs! End that waste NOW with PocketPOST. Just plug it into a dead PC and switch power on. It instantly shows you why the computer won't boot, even if the screen is blank. The built-in Logic Probe can isolate specific bad parts. The Reset detector catches flakey power supplies An optional adapter lets it work in micro channels (PS/2s). The 300+ page manual is "...worth the price of the board alone" (Computer Shopper, May 1992). It guides troubleshooting from failure symptoms. Often you can fix the problem in minutes. PocketPOST saves you time and money.

SKYROCKET YOUR CAREER
PocketPOST saves time and money, builds your skills, enhances your career, and builds happy customers. DON'T WAIT for your boss's okay; invest in your OWN future today! Order YOUR PocketPOST from the developer pcwiz Inc., and get a fast Payback!

*Note: ISA is the Industry Standard Architecture of PC, AT, Compaq, PS/2 Model 25 and 30, and clones. EISA is the Extended ISA bus of newer systems.

"Potent weapon against computer ills.", Computer Shopper

New PocketPOST debugs Dead PCs FAST!


IMPROVED TEST CARD DEBUGS DEAD PCs

PocketPOST is the NEW STANDARD IN DIAGNOSTIC TEST CARDS. After selling thousands and garnering RAVE REVIEWS in industry journals, it has been enhanced to improve your PC troubleshooting ability. PocketPOST helps you "pin down even the most elusive errors" (Computer Shopper) that cause motherboard or system failures. You use it to discover and resolve the cause when the computer seems totally dead and won't boot. According to John C. Dvorak, "You'll be a hero in your company when you buy PocketPOST...". Here's how:

FITS MOST COMPUTERS

PocketPOST is a pocket-sized card. It plugs into any expansion slot in an IBM PC, XT, AT, PS/2 model 25 or 30, Compaq, EISA, or compatible computer.

 

NOW BURNOUT-PROOF

The latest version PocketPOST is now burnout-proof. That's right! You can plug it in backwards, switch on power, and it won't blow up. That means you get worry-free operation, especially when your motherboard is out of the case and it's hard to tell which way the adapter cards are oriented.

 

 

 

VOLTMETER, POWER LEDS

When you switch on the power 4 LED’s (Light Emitting Diodes) immediately show whether ±5 and ±12V power is reaching the board. An internal voltmeter and LED shows you whether the voltage level is at least 95% of its rated value. The selection jumper is large enough to grasp easily, and is attached to the board to keep it from getting lost in the computer.

RECEIVES BIOS POST CODES

At power-on, the system ROM BIOS (Basic Input Output System) executes its POST (Power-On Self-Test). Just before running each test, the POST sends a test number code to an output test port that PocketPOST monitors.

IDENTIFIES POST FAILURES FAST

If the computer hangs during the POST, the failing test number appears on PocketPOST's two-digit hexadecimal display. You look up the meaning of the failing code in the manual, determine what circuit is bad in the system, and you can often repair it easily. PocketPOST will show POST failure information for any computer's BIOS that sends the POST codes to one of PocketPOST 's POST code ports (see specs).

LOGIC PROBE TESTS 10 TYPES OF SIGNALS

PocketPOST's ACTivity, HI, and LO LED’s show you the status of 9 vital bus signals (see specs), plus ANY other logic signals in the PC. You select the internal signal with a jumper. If it is toggling high and low, the ACTivity LED will be on. If it is high, the HI LED will be on, if low, the LOW LED will be on, and if tri-state, both LED’s will be off. If the jumper is set to select the probe, then you can attach the SuperTech Logic Probe (included) to the jack on the card, and then use the probe to check other circuits in the PC. This helps you quickly pinpoint the cause of catastrophic failures, and do signal tracing throughout the computer. You avoid the waste of expensive oscilloscopes and other test equipment.

SMALL, CONVENIENT, BUILT TO LAST

PocketPOST is small enough to tuck into your shirt pocket when it's not in use, and it is packed with the logic probe in a compact diskette-sized carrying case. Its edge connector is heavily plated to withstand thousands of insertions in systems you are testing.

A MANUAL WITH UNBELIEVABLE VALUE

PocketPOST comes with robust documentation, including a pocket-sized manual, at least 300 pages, that explains installation and use, and beep and POST codes for all major BIOS makers. It is packed with valuable troubleshooting tips and reference data, and is "Almost worth the price of the board alone." (Computer Shopper). It is a MUST for every technician's tool kit!

DETAILED SPECIFICATIONS

Function:

Display POST codes, power / Bus Clocks, logic probe status

Dimensions:

2.7 inches (689mm) tall X 3.7 inches (935mm) wide, 8 bits

Host:

IBM XT, AT, PS/2 model 25/30, Compaq, EISA, clones

Display:

2 Hex digits show POST codes for all BIOSes that issue them to available POST code ports

6 Port jumpers:

60, 80/280, 84, 90/190/85, 378/278/3BC, 300/80/84 EISA

Power LED’s:

4 LED’s show +5, -5, +12, -12V is available
1 LED shows each power is at least 95% of rated value

Power Test:

4 jumper pin sets select voltage to be measured
Jumper Attached with string; Easy to grasp so it won't get lost

Reset LED:

On when system RSTDRV occurs; jumper on to trap it

Probe LED’s:

ACTivity LED on if signal is toggling > 8 Hz
HI LED on if signal is high,
LO on if low, neither if tri-state
One HI/LO LED is brighter if its duty cycle is longer

Wattage:

Consumes 1 to 1.5 Watts

Manual:

300+ pages with all popular BIOS POST codes,
Time-saving troubleshooting hints

Warranty:

Limited 1-year parts and labour


Why You Should Buy from Geniyisis

Thousands of Picky Customers

Geniyisis was formed more than 9 years ago along with pcwiz inc which was founded by 38-year computer industry veteran Robert Hurt. pcwiz inc has since become a world leader in providing top-value PC maintenance tools to technicians, systems builders, students, schools, and end users. Our product focus has been test cards, PC diagnostic software, and data recovery software. Over the years many thousands of discriminating customers have purchased those products and have come to expect us to deliver tools that deliver value and results. Because the products live up to those expectations, we have many repeat buyers.

Fast Payback, Big Savings

Each of our products product was selected and designed to give you a fast payback and excellent value for your money by saving you an enormous amount of time and money finding and fixing computer problems. As a result, the products have deserved the good reviews and highest recommendations they have received from industry pundits like John C. Dvorak.

Warranty, Guarantee, FREE Support

We want you to be pleased with our products, service, and relationship. So, we back our products with FREE, UNLIMITED technical support via email. We also give you a generous parts and labour warranty on hardware, and a money-back guarantee that the products perform substantially as advertised across a range of application scenarios. Although we do not guarantee that our products will fix your particular computer problem, we are very pleased with the overall performance of them in a broad variety of troublesome situations, and we know you will be pleased too. (Terms & Conditions Apply)

You Win, so Order Now

Start winning NOW with Geniyisis. Click the below e-mail link to place your order or just to discuss your requirements further. Or, call in your order or dealer information request using 0870/2200101. We look forward to hearing from you and are here to help.

 

 

 

You are visitor number:

Click Me!

Click Me!

FreeBanners.co.uk

FreeBanners.co.uk